View GX-F12A_7667880.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

761 related information fiber sensors laser sensors photoelectric sensors micro photoelectric sensors area sensors light curtains pressure / flow sensors inductive proximity sensors particular use sensors sensor options simple wire-saving units wire-saving systems measurement sensors static control devices endoscope laser markers plc / terminals human machine interfaces energy consumption visualization components fa components machine vision systems uv curing systems selection guide amplifer built-in amplifer- separated gx-f/h gxl gl gx-u/gx-fu/ gx-n gx rectangular-shaped inductive proximity sensor amplifer built-in gx-f/h series industry no. 1* in stable sensing oil resistant can be installed with ample space this sensor has the longest stable sensing range among the same level of rectangular inductive proximity sensors in the industry. it is easy to install the sensor. conforming to emc directive pnp output type available different freq. type available variation at the maximum operation distance is within 8 % temperature characteristics vary within 8 % thorough adjustment and control of sensing sensitivity greatly reduces individual sensor differences and variations. the work of adjusting sensor positions when using multiple sensors and when sensors have been replaced is much easier. * not including temperature characteristics. 0.4 mm 0.016 in or less 60% less standard sensing object standard sensing object operation distance variation: 0.4 mm 0.016 in or less* operation distance variation: 1.0 mm 0.039 in or less maximum operation distance: 2.5 mm 0.098 in 8 % (2.3 to 2.7 mm 0.091 to 0.106 in) maximum operation distance: 2.5 mm 0.098 in 20 % (2.0 to 3.0 mm 0.079 to 0.1 18 in) for the gx-8 previous model image 1.0 mm 0.039 in or less components such as the sensor coil and core and product design have been totally revised to provide excellent temperature characteristics. stable sensing can be obtained regardless of the time of day or the yearly season. rate of variation in sensing range [%] 0 32 ?10 14 ?20 ?4 ?2.0 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 10 50 20 68 ambient temperature [c f] * ty pical 30 86 40 104 50 122 60 140 70 158 gx-f/h series previous models previous models: within % ) ( +15 ?10 23 c 73 f 23 c 73 f sensing range within temperatures of ?25 to +70 c (?13 to +158 f) are within 8 % of the range at +23 c (+73 f) general terms and conditions ........... f-17 sensor selection guide ................. p.757~ glossary of terms ........................ p.1386~ general precautions ..................... p.1405 http://www.sunx.com sunx website * based on research conducted by panasonic electric works sunx as of august 2010 among equivalent rectangular inductive sensors. panasonic-electric-works.net/sunx gx-f/h series stable sensing range maximum operation distance previous model type maximum operation distance stable sensing range gx-f/h series previous model gx- 6 1.6 mm 0.063 in 0 to 1.3 mm 0.051 in 0 to 1.2 mm 0.047 in gx- 8 2.5 mm 0.098 in 0 to 2.1 mm 0.083 in 0 to 1.8 mm 0.709 in gx- 12 4.0 mm 0.157 in 0 to 3.3 mm 0.130 in 0 to 3.0 mm 0.118 in gx- 15 5.0 mm 0.197 in 0 to 4.2 mm 0.165 in 0 to 4.0 mm 0.157 in long sensing range 8.0 mm 0.315 in 0 to 6.7 mm 0.264 in 0 to 6.4 mm 0.252 in * with standard sensing object example: gx-8
rectangular-shaped inductive proximity sensor gx-f/h series 762 selection guide amplifer built-in amplifer- separated gx-f/h gxl gl gx-u/gx-fu/ gx-n gx fiber sensors laser sensors photoelectric sensors micro photoelectric sensors area sensors light curtains pressure / flow sensors inductive proximity sensors particular use sensors sensor options simple wire-saving units wire-saving systems measurement sensors static control devices endoscope laser markers plc / terminals human machine interfaces energy consumption visualization components fa components machine vision systems uv curing systems environmental resistance 10 times the durability! (compared to previous models) the new integrated construction method used provides shock resistance of 10,000 m/s 2 (approx. 1,000 g in x, y and z directions for three times each), and vibration resistance clears durability tests of between 10 and 500 hz (3 mm 0.118 in amplitude in x, y and z directions for 2 hours each). in addition, resistance to impulse noise is approx. three times greater than for previous models. applications muting control of light curtains positioning processing equipment positioning metal pallets checking up / down operation of compact molding equipment sensing presence of metallic objects on a part feeder shock resistance: 1,000 gv ibration resistance: 500 hz functions indicators are easy to see over a wide feld of view a prism with a wide feld of view has been developed. this has greatly improved the visibility of the operation indicators. gx-h gx-f mounting tightening strength increased with no damage! (excluding gx-6) a metal sleeve has been inserted. it prevents the sensor from being damaged by tightening too much. conductor thickness doubled to make wiring much easier! (gx-6/8 only) highly resistant to water or oil! ip68g* protective construction the new integrated construction method used improves environmental resistance performance. the ip68g prevents damage to the sensor by stopping water and oil getting inside. * for details, refer to the specifications. approx. 1.4 times greater than before metal sleeve metal sleeve m3 screw ti ghtening torque: 0.7 n m or less m3 screw ti ghtening torque: 1 n m or less gx- 8, gx- 12 gx- 15 the conductors thickness was doubled for the gx-6/8. this makes it easier to handle and perform crimping work on the cables. in addition, the tensile strength of the crimping area has become higher. 0.08 mm 2 previous model 0.15 mm 2 gx-8 conductor thickness approx. 2 times greater
763 rectangular-shaped inductive proximity sensor gx-f/h series selection guide amplifer built-in amplifer- separated gx-f/h gxl gl gx-u/gx-fu/ gx-n gx fiber sensors laser sensors photo- electric sensors micro photo- electric sensors area sensors light curtains pressure / flow sensors inductive proximity sensors particular use sensors sensor options simple wire-saving units wire-saving systems measure- ment sensors static control devices endoscope laser markers plc / terminals human machine interfaces energy consumption visualization components fa components machine vision systems uv curing systems order guide gx-8 type notes: 1) the maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. the stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fuctuation. 2) i in the model no. indicates a different frequency type. notes: 1) the maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. the stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fuctuation. 2) i in the model no. indicates a different frequency type. type appearance (mm in) sensing range (note 1) model no. (note 2) output output operation npn output front sensing 8 0.315 7.4 0.291 23 0.906 (0 to 2.1 mm 0 to 0.083 in) stable sensing range maximum operation distance 2.5 mm 0.098 in gx-f8a npn open-collector transistor normally open gx-f8ai gx-f8b normally closed gx-f8bi top sensing 8 0.315 8.2 0.323 25 0.984 gx-h8a normally open gx-h8ai gx-h8b normally closed gx-h8bi pnp output front sensing 8 0.315 7.4 0.291 23 0.906 gx-f8a-p pnp open-collector transistor normally open gx-f8ai-p gx-f8b-p normally closed gx-f8bi-p top sensing 8 0.315 8.2 0.323 25 0.984 gx-h8a-p normally open gx-h8ai-p gx-h8b-p normally closed gx-h8bi-p type appearance (mm in) sensing range (note 1) model no. (note 2) output output operation npn output front sensing 6 0.236 24.5 0.965 6 0.236 (0 to 1.3 mm 0 to 0.051 in) maximum operation distance 1.6 mm 0.063 in gx-f6a npn open-collector transistor normally open gx-f6ai gx-f6b normally closed gx-f6bi top sensing 25 0.984 6 0.236 6 0.236 gx-h6a normally open gx-h6ai gx-h6b normally closed gx-h6bi pnp output front sensing 24.5 0.965 6 0.236 6 0.236 gx-f6a-p pnp open-collector transistor normally open gx-f6ai-p gx-f6b-p normally closed gx-f6bi-p top sensing 25 0.984 0.236 6 0.236 6 gx-h6a-p normally open gx-h6ai-p gx-h6b-p normally closed gx-h6bi-p gx-6 type stable sensing range
rectangular-shaped inductive proximity sensor gx-f/h series 764 selection guide amplifer built-in amplifer- separated gx-f/h gxl gl gx-u/gx-fu/ gx-n gx fiber sensors laser sensors photo- electric sensors micro photo- electric sensors area sensors light curtains pressure / flow sensors inductive proximity sensors particular use sensors sensor options simple wire-saving units wire-saving systems measure- ment sensors static control devices endoscope laser markers plc / terminals human machine interfaces energy consumption visualization components fa components machine vision systems uv curing systems notes: 1) the maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. the stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fuctuation. 2) i in the model no. indicates a different frequency type. gx-12 type notes: 1) the maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. the stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fuctuation. 2) i in the model no. indicates a different frequency type. type appearance (mm in) sensing range (note 1) model no. (note 2) output output operation npn output front sensing 12 0.472 7.1 0.280 27.8 1.094 (0 to 3.3 mm 0 to 0.130 in) stable sensing range maximum operation distance 4.0 mm 0.157 in GX-F12A npn open-collector transistor normally open GX-F12Ai gx-f12b normally closed gx-f12bi top sensing 27.4 1.079 12 0.472 12 0.472 gx-h12a normally open gx-h12ai gx-h12b normally closed gx-h12bi pnp output front sensing 12 0.472 7.1 0.280 27.8 1.094 GX-F12A-p pnp open-collector transistor normally open GX-F12Ai-p gx-f12b-p normally closed gx-f12bi-p top sensing 27.4 1.079 12 0.472 12 0.472 gx-h12a-p normally open gx-h12ai-p gx-h12b-p normally closed gx-h12bi-p type appearance (mm in) sensing range (note 1) model no. (note 2) output output operation npn output front sensing 31.5 1.240 0.315 8 0.591 15 (0 to 4.2 mm 0 to 0.165 in) maximum operation distance 5.0 mm 0.197 in gx-f15a npn open-collector transistor normally open gx-f15ai gx-f15b normally closed gx-f15bi top sensing 29.5 1.161 16.5 0.650 15 0.591 gx-h15a normally open gx-h15ai gx-h15b normally closed gx-h15bi pnp output front sensing 31.5 1.240 0.315 8 0.591 15 gx-f15a-p pnp open-collector transistor normally open gx-f15ai-p gx-f15b-p normally closed gx-f15bi-p top sensing 29.5 1.161 16.5 0.650 15 0.591 gx-h15a-p normally open gx-h15ai-p gx-h15b-p normally closed gx-h15bi-p gx-15 type stable sensing range order guide
765 rectangular-shaped inductive proximity sensor gx-f/h series selection guide amplifer built-in amplifer- separated gx-f/h gxl gl gx-u/gx-fu/ gx-n gx fiber sensors laser sensors photo- electric sensors micro photo- electric sensors area sensors light curtains pressure / flow sensors inductive proximity sensors particular use sensors sensor options simple wire-saving units wire-saving systems measure- ment sensors static control devices endoscope laser markers plc / terminals human machine interfaces energy consumption visualization components fa components machine vision systems uv curing systems type appearance (mm in) sensing range (note 1) model no. (note 2) output output operation npn output front sensing 31.5 1.240 0.315 8 0.591 15 (0 to 6.7 mm 0 to 0.264 in) 8.0 mm 0.315 in gx-fl15a npn open-collector transistor normally open gx-fl15ai gx-fl15b normally closed gx-fl15bi top sensing 29.5 1.161 16.5 0.650 15 0.591 gx-hl15a normally open gx-hl15ai gx-hl15b normally closed gx-hl15bi pnp output front sensing 31.5 1.240 0.315 8 0.591 15 gx-fl15a-p pnp open-collector transistor normally open gx-fl15ai-p gx-fl15b-p normally closed gx-fl15bi-p top sensing 29.5 1.161 16.5 0.650 15 0.591 gx-hl15a-p normally open gx-hl15ai-p gx-hl15b-p normally closed gx-hl15bi-p notes: 1) the maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. the stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fuctuation. 2) i in the model no. indicates a different frequency type. gx-15 (long sensing range) type stable sensing range maximum operation distance order guide 5 m 16.404 ft cable length type, fexible cable type sensor mounting bracket 5 m 16.404 ft cable length type (standard: 1 m 3.281 ft) and fexible cable (excluding 5 m 16.404 ft cable length type) are available. however, long sensing range type is not available. when ordering 5 m 16.404 ft cable length type, suffx -c5 to the model no. when ordering fexible cable type, suffx -r to the model no. (e.g.) 5 m 16.404 ft cable length type of gx-f15ai-p is gx-f15ai-p-c5 . flexible cable type of gx-f15ai-p is gx-f15ai-p-r . options designation model no. description sensor mounting bracket ms-gx6-1 mounting bracket for gx-6 type (recommended). sensors can be mounted closely together for space-saving. ms-gl6-1 mounting brackets for gx-6 type sensor mounting brackets for gl-6 can be used. interchange is possible. ms-gl6-2 ms-gxl8-4 mounting bracket for gx-8 type ms-gxl15 mounting bracket for gx-15 type aluminum sheet ms-a15f for gx- fl15 ( -p ) mounting example when mounted onto a steel or stainless steel plate ms-a15h for gx- hl15 ( -p ) 1pc. each of m3 (length: 12 mm 0.472 in ) truss head screw, nut, spring washer and plain washer is attached. ms-gxl8-4 ms-gx6-1 ms-gl6-1 ms-gl6-2 nut is not attached. nut is not attached. nut is not attached. nut is not attached. ms-gxl15 aluminum sheet ms-a15f ms-a15h
rectangular-shaped inductive proximity sensor gx-f/h series 766 selection guide amplifer built-in amplifer- separated gx-f/h gxl gl gx-u/gx-fu/ gx-n gx fiber sensors laser sensors photo- electric sensors micro photo- electric sensors area sensors light curtains pressure / flow sensors inductive proximity sensors particular use sensors sensor options simple wire-saving units wire-saving systems measure- ment sensors static control devices endoscope laser markers plc / terminals human machine interfaces energy consumption visualization components fa components machine vision systems uv curing systems specifications notes: 1) where measurement conditions have not been specifed precisely, the conditions used were an ambient temperature of +23 c +73 f . 2) i in the model no. indicates a different frequency type. 3) the maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. the stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fuctuation. 4) panasonic electric works sunxs ip68 test method 1 immerse at 0 m below 0 c +32 f water surface and leave for 30 min. then, immerse at 0 m below +70 c +158 f water surface and leave for 30 min. 2 regard the heat shock test in 1 as one cycle and perform 20 cycles. 3 leave in water at a depth of 1 m 3.281 ft in water for 500 hours. 4 after tests 1 to 3 , insulation resistance, voltage withstandability, current consumption, and sensing range must meet the standard values. 5) if using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. gx-6 type type npn output pnp output model no. (note 2) front sensing gx-f6a ( i ) gx-f6b ( i ) gx-f6a ( i ) -p gx-f6b ( i ) -p item top sensing gx-h6a ( i ) gx-h6b ( i ) gx-h6a ( i ) -p gx-h6b ( i ) -p max. operation distance (note 3) 1.6 mm 0.063 in 8 % stable sensing range (note 3) 0 to 1.3 mm 0 to 0.051 in standard sensing object iron sheet 12 12 t 1 mm 0.472 0.472 t 0.039 in hysteresis 20 % or less of operation distance (with standard sensing object) repeatability along sensing axis, perpendicular to sensing axis: 0.04 mm 0.0016 in or less supply voltage 12 to 24 v dc +10 C15 % ripple p-p 10 % or less current consumption 15 ma or less output npn open-collector transistor ? maximum sink current: 100 ma ? applied voltage: 30 v dc or less (between output and 0 v) ? residual voltage: 2 v or less (at 100 ma sink current) pnp open-collector transistor ? maximum source current: 100 ma ? applied voltage: 30 v dc or less (between output and +v) ? residual voltage: 2 v or less (at 100 ma source current) utilization category dc-12 or dc-13 output operation normally closed normally closed normally closed normally closed max. response frequency 400 hz operation indicator orange led (lights up when the output is on) environmental resistance pollution degree 3 (industrial environment) protection ip68 (iec), ip68g (jem) (note 4, 5) ambient temperature C25 to +70 c C13 to +158 f, storage: C 40 to +85 c C 40 to +185 f ambient humidity 35 to 85 % rh, storage: 35 to 95 % rh emc en 60947-5-2 voltage withstandability 1,000 v ac for one min. between all supply terminals connected together and enclosure insulation resistance 50 m?, or more, with 500 v dc megger between all supply terminals connected together and enclosure vibration resistance 10 to 500 hz frequency, 3 mm 0.118 in amplitude (max. 20 g) in x, y and z directions for two hours each shock resistance 10,000 m/s 2 acceleration (1,000 g approx.) in x, y and z directions for three times each sensing range variation temperature characteristics over ambient temperature range C25 to +70 c C13 to +158 f: within 8 % of sensing range at +23 c +73 f voltage characteristics within 2 % for +10 C15 % fuctuation of the supply voltage material enclosure: pbt, indicator part: polyester cable 0.15 mm 2 3-core oil, heat and cold resistant cabtyre cable, 1 m 3.281 ft long cable extension extension up to total 100 m 328.084 ft is possible with 0.3 mm 2 , or more, cable. net weight 15 g approx.
767 rectangular-shaped inductive proximity sensor gx-f/h series selection guide amplifer built-in amplifer- separated gx-f/h gxl gl gx-u/gx-fu/ gx-n gx fiber sensors laser sensors photo- electric sensors micro photo- electric sensors area sensors light curtains pressure / flow sensors inductive proximity sensors particular use sensors sensor options simple wire-saving units wire-saving systems measure- ment sensors static control devices endoscope laser markers plc / terminals human machine interfaces energy consumption visualization components fa components machine vision systems uv curing systems specifications gx-8 type type npn output pnp output model no. (note 2) front sensing gx-f8a(i) gx-f8b(i) gx-f8a(i)-p gx-f8b(i)-p item top sensing gx-h8a(i) gx-h8b(i) gx-h8a(i)-p gx-h8b(i)-p max. operation distance (note 3) 2.5 mm 0.098 in 8 % stable sensing range (note 3) 0 to 2.1 mm 0 to 0.083 in standard sensing object iron sheet 15 15 t 1 mm 0.591 0.591 t 0.039 in hysteresis 20 % or less of operation distance (with standard sensing object) repeatability along sensing axis, perpendicular to sensing axis: 0.04 mm 0.0016 in or less supply voltage 12 to 24 v dc +10 C15 % ripple p-p 10 % or less current consumption 15 ma or less output npn open-collector transistor ? maximum sink current: 100 ma ? applied voltage: 30 v dc or less (between output and 0 v) ? residual voltage: 2 v or less (at 100 ma sink current) pnp open-collector transistor ? maximum source current: 100 ma ? applied voltage: 30 v dc or less (between output and +v) ? residual voltage: 2 v or less (at 100 ma source current) utilization category dc-12 or dc-13 output operation normally open normally closed normally open normally closed max. response frequency 500 hz operation indicator orange led (lights up when the output is on) environmental resistance pollution degree 3 (industrial environment) protection ip68 (iec), ip68g (jem) (note 4, 5) ambient temperature C25 to +70 c C13 to +158 f, storage: C 40 to +85 c C 40 to +185 f ambient humidity 35 to 85 % rh, storage: 35 to 95 % rh emc en 60947-5-2 voltage withstandability 1,000 v ac for one min. between all supply terminals connected together and enclosure insulation resistance 50 m?, or more, with 500 v dc megger between all supply terminals connected together and enclosure vibration resistance 10 to 500 hz frequency, 3 mm 0.118 in amplitude (max. 20 g) in x, y and z directions for two hours each shock resistance 10,000 m/s 2 acceleration (1,000 g approx.) in x, y and z directions for three times each sensing range variation temperature characteristics over ambient temperature range C25 to +70 c C13 to +158 f: within 8 % of sensing range at +23 c +73 f voltage characteristics within 2 % for +10 C15 % fuctuation of the supply voltage material enclosure: pbt, indicator part: polyester cable 0.15 mm 2 3-core oil, heat and cold resistant cabtyre cable, 1 m 3.281 ft long cable extension extension up to total 100 m 328.084 ft is possible with 0.3 mm 2 , or more, cable. net weight front sensing type: 15 g approx., top sensing type: 20 g approx.. notes: 1) where measurement conditions have not been specifed precisely, the conditions used were an ambient temperature of +23 c +73 f. 2) i in the model no. indicates a different frequency type. 3) the maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. the stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fuctuation. 4) panasonic electric works sunxs ip68 test method 1 immerse at 0 m below 0 c +32 f water surface and leave for 30 min. then, immerse at 0 m below +70 c +158 f water surface and leave for 30 min. 2 regard the heat shock test in 1 as one cycle and perform 20 cycles. 3 leave in water at a depth of 1 m 3.281 ft in water for 500 hours. 4 after tests 1 to 3 , insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values. 5) if using the sensor in an environment where cutting oil droplets splatter, the sensor may deteriorate due to added substances in the oil.
rectangular-shaped inductive proximity sensor gx-f/h series 768 selection guide amplifer built-in amplifer- separated gx-f/h gxl gl gx-u/gx-fu/ gx-n gx fiber sensors laser sensors photo- electric sensors micro photo- electric sensors area sensors light curtains pressure / flow sensors inductive proximity sensors particular use sensors sensor options simple wire-saving units wire-saving systems measure- ment sensors static control devices endoscope laser markers plc / terminals human machine interfaces energy consumption visualization components fa components machine vision systems uv curing systems notes: 1) where measurement conditions have not been specifed precisely, the conditions used were an ambient temperature of +23 c +73 f. 2) i in the model no. indicates a different frequency type. 3) the maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. the stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fuctuation. 4) panasonic electric works sunxs ip68 test method 1 immerse at 0 m below 0 c +32 f water surface and leave for 30 min. then, immerse at 0 m below +70 c +158 f water surface and leave for 30 min. 2 regard the heat shock test in 1 as one cycle and perform 20 cycles. 3 leave in water at a depth of 1 m 3.281 ft in water for 500 hours. 4 after tests 1 to 3 , insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values. 5) if using the sensor in an environment where cutting oil droplets splatter, the sensor may deteriorate due to added substances in the oil. specifications gx-12 type type npn output pnp output model no. (note 2) front sensing GX-F12A(i) gx-f12b(i) GX-F12A(i)-p gx-f12b(i)-p item top sensing gx-h12a(i) gx-h12b(i) gx-h12a(i)-p gx-h12b(i)-p max. operation distance (note 3) 4.0 mm 0.157 in 8 % stable sensing range (note 3) 0 to 3.3 mm 0 to 0.130 in standard sensing object iron sheet 20 20 t 1 mm 0.787 0.787 t 0.039 in hysteresis 20 % or less of operation distance (with standard sensing object) repeatability along sensing axis, perpendicular to sensing axis: 0.04 mm 0.0016 in or less supply voltage 12 to 24 v dc +10 C15 % ripple p-p 10 % or less current consumption 15 ma or less output npn open-collector transistor ? maximum sink current: 100 ma ? applied voltage: 30 v dc or less (between output and 0 v) ? residual voltage: 2 v or less (at 100 ma sink current) pnp open-collector transistor ? maximum source current: 100 ma ? applied voltage: 30 v dc or less (between output and +v) ? residual voltage: 2 v or less (at 100 ma source current) utilization category dc-12 or dc-13 output operation normally open normally closed normally open normally closed max. response frequency 500 hz operation indicator orange led (lights up when the output is on) environmental resistance pollution degree 3 (industrial environment) protection ip68 (iec), ip68g (jem) (note 4, 5) ambient temperature C25 to +70 c C13 to +158 f, storage: C 40 to +85 c C 40 to +185 f ambient humidity 35 to 85 % rh, storage: 35 to 95 % rh emc en 60947-5-2 voltage withstandability 1,000 v ac for one min. between all supply terminals connected together and enclosure insulation resistance 50 m?, or more, with 500 v dc megger between all supply terminals connected together and enclosure vibration resistance 10 to 500 hz frequency, 3 mm 0.118 in amplitude (max. 20 g) in x, y and z directions for two hours each shock resistance 10,000 m/s 2 acceleration (1,000 g approx.) in x, y and z directions for three times each sensing range variation temperature characteristics over ambient temperature range C25 to +70 c C13 to +158 f: within 8 % of sensing range at +23 c +73 f voltage characteristics within 2 % for +10 C15 % fuctuation of the supply voltage material enclosure: pbt, indicator part: polyester cable 0.15 mm 2 3-core oil, heat and cold resistant cabtyre cable, 1 m 3.281 ft long cable extension extension up to total 100 m 328.084 ft is possible with 0.3 mm 2 , or more, cable. net weight front sensing type: 20 g approx., top sensing type: 20 g approx..
769 rectangular-shaped inductive proximity sensor gx-f/h series selection guide amplifer built-in amplifer- separated gx-f/h gxl gl gx-u/gx-fu/ gx-n gx fiber sensors laser sensors photo- electric sensors micro photo- electric sensors area sensors light curtains pressure / flow sensors inductive proximity sensors particular use sensors sensor options simple wire-saving units wire-saving systems measure- ment sensors static control devices endoscope laser markers plc / terminals human machine interfaces energy consumption visualization components fa components machine vision systems uv curing systems notes: 1) where measurement conditions have not been specifed precisely, the conditions used were an ambient temperature of +23 c +73 f . 2) i in the model no. indicates a different frequency type. 3) the maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. the stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fuctuation. 4) this is the numerical value which the sensor mount onto an insulant plate. when mounted onto a steel or stainless steel plate, insert the optional aluminum sheet between the sensor and the plate. 5) this is the numerical value which the sensor mount onto an insulant plate. when mounted onto a metallic plate, max. response frequency will decrease. 6) panasonic electric works sunxs ip68 test method 1 immerse at 0 m below 0 c +32 f water surface and leave for 30 min. then, immerse at 0 m below +70 c +158 f water surface and leave for 30 min. 2 regard the heat shock test in 1 as one cycle and perform 20 cycles. 3 leave in water at a depth of 1 m 3.281 ft in water for 500 hours. 4 after tests 1 to 3 , insulation resistance, voltage withstandability, current consumption, and sensing range must meet the standard values. 7) if using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. specifications gx-15 type type npn output pnp output long sensing range long sensing range model no. (note 2) front sensing gx-f15a ( i ) gx-f15b ( i ) gx-fl15a ( i ) gx-fl15b ( i ) gx-f15a ( i ) -p gx-f15b ( i ) -p gx-fl15a ( i ) -p gx-fl15b ( i ) -p item top sensing gx-h15a ( i ) gx-h15b ( i ) gx-hl15a ( i ) gx-hl15b ( i ) gx-h15a ( i ) -p gx-h15b ( i ) -p gx-hl15a ( i ) -p gx-hl15b ( i ) -p max. operation distance (note 3) 5.0 mm 0.197 in 8 % 8.0 mm 0.315 in 8 % (note 4) 5.0 mm 0.197 in 8 % 8.0 mm 0.315 in 8 % (note 4) stable sensing range (note 3) 0 to 4.2 mm 0 to 0.165 in 0 to 6.7 mm 0 to 0.264 in (note 4) 0 to 4.2 mm 0 to 0.165 in 0 to 6.7 mm 0 to 0.264 in (note 4) standard sensing object iron sheet 20 20 t 1 mm 0.7874 0.7874 t 0.039 in iron sheet 30 30 t 1 mm 1.181 1.181 t 0.039 in iron sheet 20 20 t 1 mm 0.7874 0.7874 t 0.039 in iron sheet 30 30 t 1 mm 1.181 1.181 t 0.039 in hysteresis 20 % or less of operation distance (with standard sensing object) repeatability along sensing axis, perpendicular to sensing axis: 0.04 mm 0.0016 in or less supply voltage 12 to 24 v dc +10 C15 % ripple p-p 10 % or less current consumption 15 ma or less output npn open-collector transistor ? maximum sink current: 100 ma ? applied voltage: 30 v dc or less (between output and 0 v) ? residual voltage: 2 v or less (at 100 ma sink current) pnp open-collector transistor ? maximum source current: 100 ma ? applied voltage: 30 v dc or less (between output and +v) ? residual voltage: 2 v or less (at 100 ma source current) utilization category dc-12 or dc-13 output operation normally open normally closed normally open normally closed normally open normally closed normally open normally closed max. response frequency 250 hz 150 hz (note 5) 250 hz 150 hz (note 5) operation indicator orange led (lights up when the output is on) environmental resistance pollution degree 3 (industrial environment) protection ip68 (iec), ip68g (jem) (note 6, 7) ambient temperature C25 to +70 c C13 to +158 f, storage: C 40 to +85 c C 40 to +185 f ambient humidity 35 to 85 % rh, storage: 35 to 95 % rh emc en 60947-5-2 voltage withstandability 1,000 v ac for one min. between all supply terminals connected together and enclosure insulation resistance 50 m?, or more, with 500 v dc megger between all supply terminals connected together and enclosure vibration resistance 10 to 500 hz frequency, 3 mm 0.118 in amplitude (max. 20 g) in x, y and z directions for two hours each shock resistance 10,000 m/s 2 acceleration (1,000 g approx.) in x, y and z directions for three times each sensing range variation temperature characteristics over ambient temperature range C25 to +70 c C13 to +158 f: within 8 % of sensing range at +23 c +73 f voltage characteristics within 2 % for +10 C15 % fuctuation of the supply voltage material enclosure: pbt, indicator part: polyester cable 0.15 mm 2 3-core oil, heat and cold resistant cabtyre cable, 1 m 3.281 ft long cable extension extension up to total 100 m 328.084 ft is possible with 0.3 mm 2 , or more, cable. net weight 20 g approx.
rectangular-shaped inductive proximity sensor gx-f/h series 770 selection guide amplifer built-in amplifer- separated gx-f/h gxl gl gx-u/gx-fu/ gx-n gx fiber sensors laser sensors photo- electric sensors micro photo- electric sensors area sensors light curtains pressure / flow sensors inductive proximity sensors particular use sensors sensor options simple wire-saving units wire-saving systems measure- ment sensors static control devices endoscope laser markers plc / terminals human machine interfaces energy consumption visualization components fa components machine vision systems uv curing systems i/o circuit diagrams note: the output does not incorporate a short-circuit protection circuit. do not connect it directly to a power supply or a capacitive load. note: the output does not incorporate a short-circuit protection circuit. do not connect it directly to a power supply or a capacitive load. symbols d 1 : reverse supply polarity protection diode d 2 : reverse output polarity protection diode z d : surge absorption zener diode tr : npn output transistor symbols d 1 : reverse supply polarity protection diode d 2 : reverse output polarity protection diode z d : surge absorption zener diode tr : pnp output transistor + ? 12 to 24v dc % +10 ?15 brown black blue load i /o circuit diagram 12 to 24v dc % +10 ?15 d 1 d 2 100 ma max. z d t r (blue) 0 v (brown) +v + ? color code users? circuit internal circuit (black) output (note) sensor circuit load + ? 12 to 24v dc % +10 ?15 load brown black blue 12 to 24v dc % +10 ?15 d 1 d 2 100 ma max. sensor circuit z d t r (blue) 0 v (brown) +v + ? color code (black) output (note) load users? circuit internal circuit npn output type pnp output type i/o circuit diagram wiring diagram wiring diagram
771 rectangular-shaped inductive proximity sensor gx-f/h series selection guide amplifer built-in amplifer- separated gx-f/h gxl gl gx-u/gx-fu/ gx-n gx fiber sensors laser sensors photo- electric sensors micro photo- electric sensors area sensors light curtains pressure / flow sensors inductive proximity sensors particular use sensors sensor options simple wire-saving units wire-saving systems measure- ment sensors static control devices endoscope laser markers plc / terminals human machine interfaces energy consumption visualization components fa components machine vision systems uv curing systems sensing characteristics (typical) gx-8 type as the sensing object size becomes smaller than the standard size (iron sheet 15 15 t 1 mm 0.591 0.591 t 0.039 in), the sensing range shortens as shown in the left fgure. as the sensing object size becomes smaller than the standard size (iron sheet 12 12 t 1 mm 0.472 0.472 t 0.039 in), the sensing range shortens as shown in the left fgure. sensing feld sensing feld correlation between sensing object size and sensing range correlation between sensing object size and sensing range l l 4 0.157 2 0.079 0 2 0.079 4 0.157 operating point (mm in) standard sensing object iron sheet 15 15 t 1 mm 0.591 0.591 t 0.039 in standard sensing object iron sheet 15 15 t 1 mm 0.591 0.591 t 0.039 in to p sensing front sensing center right left 0 1 0.039 2 0.079 4 0.157 3 0.1 18 setting distance l (mm in) l l front sensing sensing object a a mm a a in t 1 mm t 0.039 in t 1 mm t 0.039 in sensing object a a mm a a in t op sensing 1 0.039 2 0.079 4 0.157 3 0.1 18 sensing range l (mm in) sensing object side length a (mm in) 5 0.197 10 0.394 15 0.591 20 0.787 0 iron stainless steel ( sus304 ) brass aluminum gx-12 type as the sensing object size becomes smaller than the standard size (iron sheet 20 20 t 1 mm 0.787 0.787 t 0.039 in), the sensing range shortens as shown in the left fgure. as the sensing object size becomes smaller than the standard size (iron sheet 20 20 t 1 mm 0.787 0.787 t 0.039 in), the sensing range shortens as shown in the left fgure. sensing feld sensing feld correlation between sensing object size and sensing range correlation between sensing object size and sensing range 10 0.394 5 0.197 0 5 0.197 10 0.394 operating point (mm in) center right left l l standard sensing object iron sheet 20 20 t 1 mm 0. 787 0. 787 t 0.039 in standard sensing object iron sheet 20 20 t 1 mm 0.787 0.787 t 0.039 in to p sensing front sensing 0 2 0.079 4 0.157 8 0.315 6 0.236 setting distance l (mm in) sensing object side length a (mm in) sensing range l (mm in) l l 10 0.394 20 0.787 30 1.181 40 1.575 0 2 0.079 4 0.157 8 0.315 6 0.236 t 1 mm t 0.039 in t op sensing t 1 mm t 0.039 in iron stainless steel ( sus304 ) brass aluminum front sensing sensing object a a mm a a in sensing object a a mm a a in gx-6 type 4 0.157 2 0.079 02 0.079 4 0.157 operating point (mm in) center right left 0 1 0.039 2 0.079 4 0.157 3 0.1 18 setting distance l (mm in) front sensing t op sensing l l standard sensing object iron sheet 12 12 t 1 mm 0.472 0.472 t 0.039 in standard sensing object iron sheet 12 12 t 1 mm 0.472 0.472 t 0.039 in l t 1mm t 0.039 in t 0.039 in t 1mm l sensing object a a mm a a in sensing object a a mm a a in t op sensing sensing object side length a (mm in) 5 0.197 10 0.394 15 0.591 20 0.787 1 0.039 2 0.079 4 0.157 3 0.1 18 sensing range l (mm in) 0 iron stainless steel ( sus304 ) brass aluminum front sensing l l standard sensing object iron sheet 20 20 t 1 mm 0. 787 0. 787 t 0.039 in standard sensing object iron sheet 20 20 t 1 m m 0.787 0.787 t 0.039 i n to p sensin g front s ensin g 10 0.394 5 0.197 05 0.197 10 0.394 operating point (mm in) center right left 0 2 0.079 4 0.157 8 0.315 6 0.236 setting distance l (mm in) l t 1mm t 1mm t 0.039 in l sensing object side length a (mm in) sensing range l (mm in) 10 0.394 20 0.787 30 1.181 40 1.575 0 2 0.079 4 0.157 8 0.315 6 0.236 t op sensing iron stainless steel ( sus304 ) brass front s ensing sensing object a a mm a a in sensing object a a mm a a in t 0.039 in aluminum gx-15 type
rectangular-shaped inductive proximity sensor gx-f/h series 772 selection guide amplifer built-in amplifer- separated gx-f/h gxl gl gx-u/gx-fu/ gx-n gx fiber sensors laser sensors photo- electric sensors micro photo- electric sensors area sensors light curtains pressure / flow sensors inductive proximity sensors particular use sensors sensor options simple wire-saving units wire-saving systems measure- ment sensors static control devices endoscope laser markers plc / terminals human machine interfaces energy consumption visualization components fa components machine vision systems uv curing systems sensing characteristics (typical) sensing feld correlation between sensing object size and sensing range as the sensing object size becomes smaller than the standard size (iron sheet 30 30 t 1 mm 1.181 1.181 t 0.039 in), the sensing range shortens as shown in the left fgure. 0 0 setting distance l (mm in) 5 0.197 5 0.197 10 0.394 10 0.394 10 0.394 5 0.197 to p sensing operating point (mm in) center right left l l standard sensing object iron sheet 30 30 t 1 mm 1.181 1.181 t 0.039 in standard sensing object iron sheet 30 30 t 1 mm 1.181 1.181 t 0.039 in front sensing t 1mm l l t 1mm t 0.039 in t 0.039 in sensing object side length a (mm in) sensing range l (mm in) 10 0.394 10 0.394 5 0.197 20 0.787 30 1.181 40 1.575 0 t op sensing iron stainless steel ( sus304 ) brass front sensing sensing object a a mm a a in sensing object a a mm a a in aluminum gx-15 (long sensing range) type precautions for proper use refer to general precautions. ? never use this product as a sensing device for personnel protection. ? in case of using sensing devices for personnel protection, use products which meet laws and standards, such as osha, ansi or iec etc., for personnel protection applicable in each region or country. ? use the optional sensor mounting bracket when installing. ? to mount the sensor with a nut, the mounting hole diameter should be ?3.4 mm ?0.134 in. 1 insert the sensor into the bracket as shown on the right. 2 push the sensor until the bracket hook is lodged in the groove on the upper portion of the sensor. 3 fix the bracket in place with m3 pan head screw. mounting 22 mm 0.866 in ms-gx6-1 m3 pan head screw ( purchase separately .) ? 3.4 mm ? 0.134 in hole groove hook cable m3 x 0.5 mm 0.020 in tapped hole or ?3.4 mm ?0.134 in hole if mounting using nut and washers ( purchase separately .) ? to mount the sensor with a nut, the mounting hole diameter should be ?3.4 mm ?0.134 in. ms-gl6-1 ms-gl6-2 ?2.4 mm 0.098 in hole 10 mm 0.394 in 13.6 mm 0.535 in m3 pan head screws (purchase separately .) m3 pan head screw (purchase separately .) m3 x 0.5 mm 0.020 in tapped holes or ?3.4 mm ?0.134 in holes m3 x 0.5 mm 0.020 in tapped hole or ?3.4 mm ?0.134 in hole if mounting using nuts and washers (purchase separately .) if mounting using nut and washers (purchase separately .) gx-8 type ? make sure to use a m3 (length: 12 mm 0.472 in or more) truss head screw. the tightening torque should be 0.7 nm or less. do not use a fat head screw or a pan head screw. gx-12 type gx-6 type gx-15 type ? the tightening torque should be 0.7 nm or less. ? to mount the sensor with a nut, the mounting hole diameter should be ?3.4 mm ?0.134 in. further, the hole in which the boss is inserted should be ?2.5 mm ?0.098 in and 3 mm 0.118 in , or more, deep. ? the tightening torque should be 1 nm or less. ? to mount the sensor with a nut, the mounting hole diameter should be ?3.4 mm ?0.134 in. m3 (length 12 mm 0.472 in or more) pan head scre w (purchase separately.) m3 0.5 mm 0.020 in tapped hole (depth: 10 mm 0.394 in or more) or ?3.4 mm ?0.134 in thru-hole if mounting using nut and washers (purchase separately.) 16 mm 0.630 in ?2.5 mm ?0.098 in hole (depth: 3 mm 0.118 in or more) m3 (length 12 mm 0.472 in) truss head screw (accessory for ms-gxl8-4 ) m3 0.5 mm 0.020 in tapped hole (depth: 8 mm 0.315 in or more) or ?3.4 mm ?0.134 in thru-hole if mounting using nut and washers (accessories for ms-gxl8-4 ) ?2.4 mm ?0.098 in hole (depth: 3 mm 0.315 in or more) ms-gxl8-4 (accessory) 11.5 mm 0.453 in ? when installing the long sensing range type on iron or stainless steel plate, put the optional aluminum sheet in between the sensor and the plate. aluminum sheet (optional) ? ms-a15f ? ms-a15h m3 pan head screws or truss head screws do not use flat head screws. m3 x 0.5 mm 0.020 in tapped holes or ?3.4 mm ?0.134 in holes if mounting using nuts and washers (purchase separately.) (sensor mounting bracket) ms-gxl15 9 mm 0.354 in
773 rectangular-shaped inductive proximity sensor gx-f/h series selection guide amplifer built-in amplifer- separated gx-f/h gxl gl gx-u/gx-fu/ gx-n gx fiber sensors laser sensors photo- electric sensors micro photo- electric sensors area sensors light curtains pressure / flow sensors inductive proximity sensors particular use sensors sensor options simple wire-saving units wire-saving systems measure- ment sensors static control devices endoscope laser markers plc / terminals human machine interfaces energy consumption visualization components fa components machine vision systems uv curing systems sensing range ? the sensing range is specifed for the standard sensing object. with a non-ferrous metal, the sensing range is obtained by multiplying with the correction coeffcient specifed below. further, the sensing range also changes if the sensing object is smaller than the standard sensing object or if the sensing object is plated. correction coeffcient model no. metal gx-f6 gx-h6 type gx-f8 gx-h8 type gx-f12 gx-h12 type gx-f15 gx-h15 type gx-fl15 type gx-hl15 type iron 1 1 1 1 1 1 stainless steel (sus304) 0.76 approx. 0.76 approx. 0.79 approx. 0.68 approx. 0.70 approx. 0.76 approx. brass 0.50 approx. 0.50 approx. 0.56 approx. 0.47 approx. 0.45 approx. 0.50 approx. aluminum 0.48 approx. 0.48 approx. 0.53 approx. 0.45 approx. 0.43 approx. 0.48 approx. wiring others ? the output does not incorporate a short-circuit protection circuit. do not connect it directly to a power supply or a capacitive load. ? do not use during the initial transient time (50 ms) after the power supply is switched on. infuence of surrounding metal ? when there is a metal near the sensor, keep the minimum separation distance specifed below. gx-f6 type gx-f8 type gx-f12 type gx-f15 type gx-fl15 type a 6 mm 0.236 in (note 1) 7.4 mm 0.291 in 7.1 mm 0.280 in 8 mm 0.315 in 8 mm 0.315 in (note 2) b 8 mm 0.315 in 8 mm 0.315 in 20 mm 0.787 in 20 mm 0.787 in 30 mm 1.181 in c 3 mm 0.118 in 3 mm 0.118 in 7 mm 0.276 in 7 mm 0.276 in 10 mm 0.394 in gx-h6 type gx-h8 type gx-h12 type gx-h15 type gx-hl15 type d 3 mm 0.118 in 4 mm 0.157 in 7 mm 0.276 in 6 mm 0.236 in 12 mm 0.472 in e 10 mm 0.394 in 10 mm 0.394 in 20 mm 0.787 in 20 mm 0.787 in 30 mm 1.181 in f 2 mm 0.079 in 3 mm 0.118 in 3 mm 0.118 in 0 mm 0 in 10 mm 0.394 in (note) g 2 mm 0.079 in 3 mm 0.118 in 3 mm 0.118 in 3 mm 0.118 in 10 mm 0.394 in front sensing type metal a b c metal metal c top sensing type metal metal e f d metal g g metal mutual interference prevention ? when two or more sensors are installed in parallel or face to face, keep the minimum separation distance specifed below to avoid mutual interference. front sensing top sensing h j gx-f6 gx-h6 type between i type and non i type 0 mm (note 2) 15 mm 0.591 in between two i types or two non i types 13 mm 0.512 in 25 mm 0.984 in gx-f8 gx-h8 type between i type and non i type 0 mm (note 2) 15 mm 0.591 in between two i types or two non i types 20 mm 0.787 in 35 mm 1.378 in gx-f12 gx-h12 type between i type and non i type 0 mm (note 2) 25 mm 0.984 in between two i types or two non i types 25 mm 0.984 in 50 mm 1.969 in gx-f15 gx-h15 type between i type and non i type 0 mm (note 2) 25 mm 0.984 in between two i types or two non i types 45 mm 1.772 in 70 mm 2.756 in gx-fl15 gx-hl15 type between i type and non i type 0 mm (note 2) 25 mm 0.984 in between two i types or two non i types 110 mm 3.059 in 170 mm 6.693 in h h j h j notes: 1) i in the model no. specifes the different frequency type. 2) close mounting is possible for up to two sensors. when mounting three sensors or more at an equal spacing, align the model with i and the model without i alternately. the minimum value of dimension h should be as given below. gx-f6 / h6 type: 3.5mm 0.138 in gx-f8 / h8 type: 6mm 0.236 in gx-f12 / h12 type: 6.5mm 0.256 in gx-f15 / h15 type: 15mm 0.591 in gx-fl15 / hl15 type: 47.5mm 1.870 in precautions for proper use refer to general precautions. notes: 1) when using ms-gx6-1 (recommended mounting bracket), the distance a including the thickness of mounting bracket will be 6.4 mm 0.252 in. 2) the gxl-fl15 type should be mounted on an insulator. to mount it on an iron or stainless steel, use the enclosed aluminum sheet. note: when gx-hl15 type is mounted on an insulator or seated on the enclosed aluminum sheet, the distance f can be zero.
rectangular-shaped inductive proximity sensor gx-f/h series 774 selection guide amplifer built-in amplifer- separated gx-f/h gxl gl gx-u/gx-fu/ gx-n gx fiber sensors laser sensors photo- electric sensors micro photo- electric sensors area sensors light curtains pressure / flow sensors inductive proximity sensors particular use sensors sensor options simple wire-saving units wire-saving systems measure- ment sensors static control devices endoscope laser markers plc / terminals human machine interfaces energy consumption visualization components fa components machine vision systems uv curing systems dimensions (unit: mm in) the cad data in the dimensions can be downloaded from our website. 8 0.315 23 0.906 22.5 0.886 11 .5 0.45 3 6. 5 0.25 6 5. 4 0.21 3 6. 3 0. 24 8 ?9 ?0 .3 54 ?3 .1 ? 0.12 mounting hole ?3 ?0.1 18 cable, 1 m 3.281 ft long 8.55 0.337 7.4 0.291 2.95 0.1 16 7.7 0.303 9.75 0.384 2.65 0.104 5 0.197 5.3 0.209 operation indicator (orange) sensing direction 1 0.03 9 sensor gx-f8 sensor gx-h8 sensor gx-f12 operation indicator (orange) ?2.3 ?0.091 16 0.630 2.8 0.1 10 3.3 0.130 12.4 0.488 11 .05 0.435 1.5 0.059 5.6 0.221 5.2 0.205 7.1 0.280 12 0.472 ? 12.5 ? 0.492 27.8 1.095 4.4 0.173 ?6 ? 0.236 screw seat, 0.8 0.032 deep 12 0.472 16 0.630 27 1.063 7.8 0.307 6.8 0.268 ?3 .1 ? 0.12 mounting hole ?3 ?0 .1 18 ca ble, 1 m 3.281 ft long 5 0.197 sensing direction 3.7 0.146 r4.25 r0.167 4.6 0.181 8.2 0.323 8.6 0.339 18.5 0.728 6.8 0.268 3.85 0.152 9.1 0.358 2 0.079 2.5 0.098 25 0.984 1 0.03 9 2.4 0.095 4.8 0.189 5.3 0.209 sensing direction operation indicator (orange) ?3 .1 ? 0.122 mounting hole 5. 4 0.21 3 6. 3 0. 248 ?3 ?0.1 18 cable, 1 m 3.281 ft long 8 0.315 sensor gx-h12 12.5 0.492 12 0.472 7.8 0.307 4.8 0.189 3.1 0.12 5.8 0. 22 8 6. 2 0. 24 4 8.65 0.341 operation indicator (orange) ?2.3 ?0.091 1.5 0.059 22.2 0.874 12 0.472 ?6 ? 0.236 screw seat, 1.4 0.055 deep 16 0.630 27.4 1.079 6.8 0.268 ?3 .1 ? 0.122 mounting hole ?3 ?0.1 18 cable, 1 m 3.281 ft long sensing direction 6. 5 0.25 6 5.5 0.21 7 13 0.51 2 r6.25 r0.246 2.5 0.098 3 0. 11 8 4.4 0.173 gx-f6 sensor gx-h6 sensor 26 1.024 29.5 1.161 21.5 0.846 11 .95 0.470 9 0.354 2.8 0.1 10 5.3 0.209 7.2 0.283 3 0.1 18 2.3 0.091 ?15.5 ?0.610 15 0.591 16.5 0.650 15.65 0.616 14.15 0.557 8.5 0.335 operation indicator (orange) ?3 ?0.1 18 cable, 1 m 3.281 ft long 2-?3.1 ?0.122 holes sensing direction 9 0.354 operation indicator (orange) ?3 ?0.1 18 cable, 1 m 3.281 ft long 2-?3.1 ?0.122 holes sensing direction ?15.5 ?0.610 31.5 1.240 20.5 0.807 14 .15 0.557 7.8 0.307 7.5 0.295 15 0.591 8 0.315 3.7 0.146 2.8 0.11 0 5.3 0.209 5.7 0.224 gx-f(l)15 sensor gx-h(l)15 sensor 24.5 0.965 0.5 0.020 6 0.236 11 0.433 operation indicator (orange) ?3 ?0.1 18 cable, 1 m 3.281 ft long sensing direction 0.5 0.020 3 0.11 8 6 0.236 6 0.236 2.6 0.102 2.5 0.098 25 0.984 6 0.236 11 .5 0.453 operation indicator (orange) ?3 ?0.1 18 cable, 1 m 3.281 ft long sensing direction 0.5 0.020 6 0.236 6 0.236 3 0.11 8 0.5 0.020
775 rectangular-shaped inductive proximity sensor gx-f/h series selection guide amplifer built-in amplifer- separated gx-f/h gxl gl gx-u/gx-fu/ gx-n gx fiber sensors laser sensors photo- electric sensors micro photo- electric sensors area sensors light curtains pressure / flow sensors inductive proximity sensors particular use sensors sensor options simple wire-saving units wire-saving systems measure- ment sensors static control devices endoscope laser markers plc / terminals human machine interfaces energy consumption visualization components fa components machine vision systems uv curing systems dimensions (unit: mm in) the cad data in the dimensions can be downloaded from our website. ms-gxl8-4 sensor mounting bracket for gx-8 type (optional) material: stainless steel (sus304) 1 pc. each of m3 (length 12 mm 0.472 in ) truss head screw, nut, spring washer and plain washer is attached. ms-gx6-1 sensor mounting bracket for gx-6 type (optional) ms-gl6-1 ?2.4 ?0.094 hole, 3 0.118 or more deep 22.2 0.874 3.55 0.140 t 0.4 t 0.016 6.8 0.268 6.4 0.252 2.3 0.091 25.75 1.014 25.35 0.998 ?3.1 ?0.122 22 0.866 m3 0.5 0.020 tapped hole, 8 0.315 or more deep 2 0.079 ( ) 2-m3 0.5 0.020 tapped holes (or 2-?3.4 ?0.134 holes) 6 0.236 5.6 0.220 3.2 0.126 13.6 0.535 19.6 0.772 (note) 6 0.236 5.5 0.217 t 0.4 t 0.016 2-3.2 3.8 0.126 0.150 oblong holes note: 20 mm 0.787 in with the sensor ftted. mounting hole dimensions mounting hole dimensions ms-gl6-2 10 0.394 2.2 0.087 6 0.236 m3 0.5 0.020 tapped hole (or ?3.4 ?0.134 hole) 3.2 3.8 0.126 0.150 oblong hole ?2.4 ?0.094 hole 6 0.236 5.3 0.209 1.5 0.059 5.6 0.220 13.2 0.520 (note) 5.5 0.217 t 0.4 t 0.016 3.2 0.126 note: 13.4 mm 0.528 in with the sensor ftted. 2 0.079 2 0.079 2.3 0.091 0.3 0.012 ?2.4 ?0.094 hole, 3 0.1 18 or more deep m3 0.5 0.020 tapped hole, 8 0.315 or more deep t 0.4 t 0.016 ?3.1 ?0.122 hole center of sensing 3.3 0.130 (16.2) (0.638) 15.8 0.622 9 0.354 11 .5 0.453 (1 1.5) (0.453) 4.5 0.177 material: spcc 14 0.551 7 0.276 t 2 t 0.079 9 0.354 2.5 0.098 2-m3 0.5 0.020 tapped holes 4 0.157 9 0.354 30 1.181 39.5 1.555 ms-a15h: 30 1.181 ( ) 21 0.827 1.9 0.075 1.9 0.075 2-?3.2 ?0.126 2-3.2 5.1 0.126 0.201 oblong holes t = 0.3 0.012 ms-gxl15 ms-a15f ms-a15h aluminum sheet (optional) mounting hole dimensions mounting hole dimensions sensor mounting bracket for gx-6 type (optional) sensor mounting bracket for gx-6 type (optional) sensor mounting bracket for gx-15 type (optional)
memo 776

▲Up To Search▲

Price & Availability of GX-F12A

	To Download GX-F12A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .